From left: crane operators; Christian Prinz, Ralf Rudisch, Mike Eule-Schuster, Denny Beulke, Thomas Tschemmer and Jürgen Müller.

Crane operators, from left to right: Christian Prinz, Ralf Rudisch, Mike Eule-Schuster, Denny Beulke, Thomas Tschemmer and Jürgen Müller

Logistics contractor Maxikraft hoisted a 108 tonne cylindrical storage tank, measuring 33 metres long, over two obstacles during its transport to Schkopau Power Station in Saxony-Anhalt, Germany.

The storage tank, which began its journey at a factory assembly area, had to be hoisted over a pipe bridge measuring 12 metres high that was blocking its route out of the factory.

Maxikraft used its Liebherr LTM 1500-8.1 and an LTM 1750-9.1 mobile crane, positioned on opposite sides of the pipe bridge, to lift the storage tank.

Almost there – the two Liebherr mobile cranes carefully hoist the 108 tonne steel tank over the pipe bridge.

Two Liebherr mobile cranes hoisted the 108 tonne steel tank over the pipe bridge

Upon clearing the obstacle the team transported the storage tank less than 1 kilometre to the power station where a Liebherr LG 1750 lattice boom mobile crane was in place to lift the tank over a concrete wall into the power station.

The Liebherr LG 1750 ready and waiting to receive the storage tank for the final lift operation

The LG 1750 was fitted with 250 tonnes of ballast and set up with a small support base

Due to limited space, the LG 1750 was set up with a support base measuring 12 x 12 metres. The manoeuvre required a slewing platform extension to ensure the 115 tonne gross load could be managed. This increased the ballast radius by 2.5 metres and raised the crane’s lifting capacity.

The two mobile cranes work together to position the storage tank to a verticle position ready for the LG 1750 to lift it over the concrete wall

The two mobile cranes work together to lift the storage tank into a verticle position before it’s lifted over the concrete wall

The Maxikraft team used both the LTM 1500-8.1 and the LG 1750, fitted with a 70 metre main boom, to lift the storage tank into a vertical position. The LG 1750 then hoisted it over the 16 metre high wall.

Having cleared the concrete wall, the storage tank was lowered into its installation location in the power station.

Fitted with a 70 metre main boom, Maxikraft's LG 1750 lifts the storage tank over the 16 metre high concrete wall

Fitted with a 70 metre main boom, Maxikraft’s Liebherr LG 1750 lifts the storage tank over a 16 metre high concrete wall

 

Newsletter

Delivered directly to your inbox World Crane Week features the pick of the breaking news stories, product launches, show reports and more!

Sign up for free

Newsletter

Delivered directly to your inbox World Construction Week features the pick of the breaking news stories, product launches, show reports and more!

Go to newsletters