WHAT: SC&RA Crane & Rigging Workshop

WHEN: 26 to 28 September 2018

WHERE: Marriott Downtown, Louisville, Kentucky, USA

REGISTRATION INFORMATION: www.scranet.org

Lead photo Lexington

The 2018 Workshop is at the Marriott Downtown in Louisville, KY, USA

The 2018 SC&RA Crane & Rigging Workshop will take place on 26-28 September at the Louisville Marriott Downtown hotel in Louisville, Kentucky. The Workshop brings together owners, operators, safety directors and operations managers from the industry’s foremost manufacturers and companies. Workshop sessions will have an emphasis on safety, regulatory and consensus standards, training, equipment maintenance, as well as current issues affecting the industry. There will also be an Exhibit Centre, with more than 90 booths, where attendees can make new contacts quickly and easily.  

session 5

Educational session topics will include safety, regulatory and consensus standards, training and equipment maintenance

Recognising pitfalls

A concern many in attendance have is the persistent nature of litigation throughout the marketplace. Bill Smith, executive vice president of claims and risk management for NBIS, will address this issue with his presentation Practical ways to protect your company from lawsuits. Smith will examine the lottery-like nature of today’s lawsuits and offer attendees practical ways to defend themselves in the event of a suit filed against their company or employees.

Similarly underscoring the importance of knowing the rules of the game, Steven Todd, SC&RA vice president of transportation, will articulate how one permitting mistake could cost a company millions of dollars in his session Mobile cranes on the move: using new OS/OW rules to your advantage. A former state department of transportation official, Todd will explain how to take advantage of a recent federal government ruling on mobile cranes to maximise time and budget. All aspects of securing permits and working with law enforcement and government officials will be covered.

Jim Wiethorn, PhD., P.E., Haag Engineering, and Fernanda Leite, PhD, P.E., associate professor of the University of Texas, will examine what contributes to accidents in their presentation The hazards of service providers. Wiethorn and Leite will point to recent research that suggests a that lack of safety talks, pre-lift meetings and miscommunication between service providers (crane rental firms) and their clients are largely responsible and outline what attendees can do to reduce the risk of accidents.  

There will also be legal advice in the form of Michael Rubin, partner attorney, Goldberg Segalla, who will talk attendees through how to take control of their company’s compliance by knowing their rights and responsibilities during his session An attorney’s point of view: playing offense with OSHA.

Staying compliant

Using SC&RA’s new Severe Weather Guidelines publication as an example, Troy Pierce, vice president, health safety and environmental, of TNT Crane & Rigging, will explain best practices for managers who want to introduce new practices and rules to employees in his presentation Bridging the gap between compliance and choice.

Complementing Pierce, Patrick Clark, national rental support manager at Lifting Gear Hire, and Tom Beasley, business support manager at Lifting Gear Hire, will be looking at the issues of organisation and compliance when it comes to tooling operations. During their presentation Tackle any job with better tool management, Clark and Beasley will show attendees the options available in inventory management, inspection recording, and other tools, so that their teams can be both efficient and compliant (ASME B30 standards and OSHA 1910).

Crucial calculations

Application will be the name of the game when Brooks Nunley, technical sales and key account manager for Cortland Company, and Dennis Sherman, technical sales manager of cranes for Sampson Rope, take the stage to present How to successfully use synthetics. They will look at the effects of bending on synthetic fibre ropes and slings and how they differ from steel wire and round slings.

Staying on theme, Sam Socolow, product application and training manager for manufacturer and distributor of below the hook lifting devices and rigging supplies Ashley Sling will look at how to calculate reduction and tension factors and the effects of angular loading on hardware in Calculating sling angles and hardware selection.  

Jamison Fox from International Industrial Contracting Corporation will guide attendees through the elements of preparing an engineered lift plan in his presentation Engineered lift plans from A to Z.

In addition to two evening receptions and a First Timers’ Briefing, the Workshop will also shine a light on the 2018 Rigging Job of the Year winners, representing the four best projects in their categories for exemplifying safety practices, ingenuity and specialized engineering. 

The speakers and their presentations

  • NBIS’ Bill Smith will address ’Practical ways to protect your company from lawsuits’.
  • SC&RA’s Steven Todd will present ’Mobile cranes on the move: using new OS/OW rules to your advantage’.
  • Haag Engineering’s Jim Wiethorn and University of Texas Associate Professor Fernanda Leite will examine what contributes to accidents, discussing ’The hazards of service providers’.
  • Goldberg Segalla Partner Attorney Michael Rubin will speak on the subject ’An attorney’s point of view: playing offense with OSHA’.
  • Lifting Gear Hire’s Patrick Clark and Tom Beasley will present a session titled ’Tackle any job with better tool management’.
  • Cortland Company’s Brooks Nunley and Sampson Rope’s Dennis Sherman will discuss ’How to successfully use synthetics’.
  • Ashley Sling’s Sam Socolow will present ’Calculating sling angles and hardware selection’.
  • International Industrial Contracting’s Jamison Fox will address ‘Engineered lift plans from A to Z’.

Plant Tour

Link-Belt Cranes is hosting a factory tour for Workshop attendees. At its 770,000-square-foot plant in Lexington, Kentucky, participants can see firsthand everything it takes to manufacture and assemble a Link-Belt crane. Machining centres, assembly, lattice and formed boom bays, final paint and much more – are all customary stops along the way. The tour will culminate with lunch and a Link-Belt signature CraneFest presentation that will show off the company’s latest product offerings.

The SC&RA Leadership Forum is another key component of the SC&RA Crane & Rigging Workshop. The inclusive program is designed to help fast-track the best and brightest young minds to the next levels of professional and Association leadership. Accepted applicants will be matched with a mentor and learn from various industry veterans about workplace trends and industry issues (all interested can apply at www.scranet.org/leadership).

With more than 90 booths, the Crane & Rigging Workshop Exhibit Center gives attendees the opportunity to hear about new products and services, make new contacts and get to know industry leaders.

 

Link-Belt Cranes Headquarters Lexington KY-1

 

 

 

 

 

 

Newsletter

Delivered directly to your inbox World Crane Week features the pick of the breaking news stories, product launches, show reports and more!

Sign up for free

Newsletter

Delivered directly to your inbox World Construction Week features the pick of the breaking news stories, product launches, show reports and more!

Go to newsletters