Augers well

By Steve Skinner10 September 2008

Auger Torque Europe has launched two new trenching attachments capable of cutting trenches between 5

Auger Torque Europe has launched two new trenching attachments capable of cutting trenches between 50 mm and 250 mm wide

Auger Torque Europe has launched two new trenching attachments capable of cutting trenches between 50 mm and 250 mm wide.

The HDT250 disc cutter slices trenches between 50 mm and 95 mm wide at a depth of up to 250 mm, while the TPL trencher is capable of cutting trench widths of between 125 mm and 250 mm at a depth of up to 1 m. Fitted with an optional long boom, the depth can be increased to 1,2 m.

The TPL trencher weighs 340 kg and features a slip clutch to protect the tractor and trencher from shock loads and a hydraulic lift.

The HDT cutter is compatible across a range of mini excavators and skid steer loaders and requires a hydraulic flow rate of between 38 and 78 l/minute at a pressure of 110 bar.

Latest News
How did Saudi Aramco perform this major lift at Fadhili gas plant?
Early 2021 saw a critical lift performed at the Fadhili gas plant in Saudi Arabia when a reboiler tube was removed for inspection. Mustafa Al Abdulmohsin reports
Onshore construction completed for Triton Knoll
UK’s longest ever offshore wind cabling project concludes after three years
Sinoboom to give away scissor at ARA Show
Sinoboom North America will be giving away a Sinoboom 1330SE electric scissor lift in celebration of attending its first ARA Show