Ruthmann reaches 650 with Kiloutou

By Euan Youdale20 May 2015

From left: Rolf Kulawik, Ruthmann general manager, Remy Doyen, Ruthmann area sales manager in France

From left: Rolf Kulawik, Ruthmann general manager, Remy Doyen, Ruthmann area sales manager in France; and Kiloutou’s products manager Xavier Decoster.

Germany-based Ruthmann has sold more than 650 Steiger TB 270 truck mounts since the model’s launch five years ago.

The 650th unit of the 27 m working height machine was purchased by French rental giant Kiloutou. The announcement was made at Intermat in France when Rolf Kulawik, Ruthmann’s general manager and the company’s area sales manager in France Remy Doyen, handed a trophy to Kiloutou’s products manager Xavier Decoster.

Also at Intermat, the manufacturer launched its TB 270+. The ‘+’ represents a complete redesign of the TB 270. The development was essential due to the new Euro 6 emission standards which will become mandatory in many European countries in the third quarter 2015. Because Euro 6 vehicles are much heavier than previous Euro 5 chassis, the overall weight had to be reduced. This new model has the same functions and conceptual design as its predecessor which has sold more than 650 times since 2010.

High strength, fine-grain steel has been used and the turret has been strengthened with welded ‘honeycombs’ which results in a machine that is 20% lighter, with 20% greater load torque and 20% more torsional rigidity.

The full 27 m working height is attainable at the maximum 230 kg cage load capacity. With a cage load of 100 kg, the TB 270+ has a horizontal outreach of 16.4 m, which is almost two metres more than its predecessor.

Latest News
ABLE receives increase on asset-based loan
New York-based ABLE Equipment Rental receives increase on existing asset-based loan in order to grow fleet and footprint 
Court upholds Syrian charges against Lafarge
Case relates to Syrian plant that was kept open during civil war, endangering staff that worked there 
New software makes using GNSS easier
Updated RxTools software package now includes easy ‘set-up’ and calibration tool