Access Exhibitors

Genie Industries G200 in Gold area

Genie has been quiet about launches at ConExpo, but visitors can expect to see a re-engineered GTH- 5519 telehandler. Elsewhere on the stand, they can look at new S-60 and S-65 TraX telescopic booms on sets of four rubber tracks.

Haulotte Group G-236

The new 86 ft working height, 75 ft outreach, self-propelled HB86 TJ will stand tall at this French company's stand. As well as a telescoping boom, it features a 16 ft telescoping jib for additional access flexibility.

Hinowa S-16200

The Italian specialist in compact ‘Spider' platforms – and other compact equipment – will exhibit its track systems at ConExpo. ReachMaster, its US aerial lift dealer is exhibiting aerials at stand B-962.

Hydra Platforms G-324

Hydra will exhibit from its range of truck and trailer mounted underbridge inspection platforms.

Hydro Mobile B-989

Here visitors can see mast climbing Raxtar hoists, now being sold in North America by Hydro Mobile. The hoists have payloads up to 7000 lb, speeds up to 300 ft/min, and lifting heights to 660 ft. They will be compatible with the masts used on Hydro-Mobile's F-Series mast climbers.

International Powered Access Federation (IPAF) SZ1000, W Blue lot

IPAF's Safety Zone covers nearly 8000 square feet and will feature a dynamic 15-minute demonstration at 10 am, noon, and 2 and 4 pm of the dangers of not wearing a harness in boom type platforms. Visitors can receive practical advice on the correct way to use a harness and view a variety of aerial platforms supplied by member manufacturers.

International Rental News S-597

AI's sister magazine exhibits on the stand of publisher KHL Group.

JCB G-160

JCB has topped its Loadall line-up with the new 510-56 with a 10000 lb lift capacity and a working height of 56 ft. Also new are the 535-125 and 535- 140 HiViz Loadalls, which feature lower boom pin height, smaller boom sections, and new axles.

JLG Industries G-170, S-813

Prominent at JLG's stand will be the 11000 lb, 18 ft maximum lift height G5-18A super compact telehandler, which is 146 inches long by 71 inches wide by 77 inches high. Its 5500 lb maximum lift and 1850 lb lift performance at a fully extended reach of 11 ft give it the best capacity in the compact telehandler class, says the company.

Elsewhere on the stand will be models from JLG's 19 to 32 ft platform height ES scissors series, enhanced with on-board diagnostics, better and re-routed cabling, and a new brake housing, for greater reliability and easier maintenance.

KHL Group S-597

KHL Group is the publisher of Access International, International Rental News, American Lift & Handlers, and other magazines in the international construction industry.

Loegering C-5796

This manufacturer of tracked undercarriage is showing its QTS set of four rubber-track undercarriages that bolt directly to hubs of most boom lifts. The company is supplying several Genie booms fitted with the tracks.

Manitou G-195

The French company is expanding its range of handlers in North America with the launch of the 46200 lb lift capacity MHT 10210.

MEC Aerial Work Platforms B-959

On stand will be MEC's first boom lift, the 40 ft working height M40T, as well as its first heavy-duty scissor lift, the rough-terrain, 1000 lb capacity 3773RT HD. Visitors can also see the 3072ES and 3772ES electric scissors, which have been in production since October following a design originally developed for the European market to meet “green” concerns.

Miller Fall Protection

Miller is showing its new line of Falcon self-retracting web lifelines with 16 ft and 20 ft working capabilities. They weigh less than 3 lb and are rated for 400 lb.

Pettibone G-259

Pettibone is debuting the T10056 from its Traverse series of telehandlers, which it expects to have re-rated to 11000 lb capacity by the time of the show. Its maximum lift height of 56 ft remains certain, however, as well as its 70 inches of horizontal boom travel throughout the lift range.

Raxtar

Hydro Mobile will be showing manufacturer Raxtar's hoists.

ReachMaster B-962

ReachMaster is the US company that sells Worldlift Industries' products, which include the Falcon Spider machines and the Denka atrium lifts and trailer mounted platforms. It will also show Hinowa aerial platforms.

SBU Hoists B-920

As the distributor for Baoda Engineering Machinery in China, SBU is introducing two, Yaskawa inverter controlled, 300 ft/min hoists: the S6000-C/DC and S7000-C/DC, with 6000 and 7000 lb capacities.

SIA L-3114

The US's Scaffold Industry Association will promote its safety training activities, delivered primarily through the 50-odd IPAF-certified training centers across the US.

Skyjack B-958

Skyjack will showcase its new 66 ft platform height SJ 66T, with a telescopic boom and articulating jib. It features 4-wheel drive, direction sensing drive and steer controls. Without a jib, it is the 61 ft working height SJ 61T.

Snorkel International G-117

Snorkel will show the UpRight models that it is now manufacturing in the US since the company's acquisition by Tanfield Group in the UK. These include the 18 ft working height, battery-powered TM12 mast lift, the 32 ft working height S2633 scissor lift, the 32 ft working height and 36 ft working height SR3084SL, and the 44 ft working height AB38N and AB38W machines.

Terex Corp G-200

Terex access equipment and telehandlers: see entry for Genie Industries.

Time Manufacturing B-957

Standing tall at this stand will be the 56 ft working height VST 52SI, which offers an outreach of 31.5 ft and has a side-mounted, 100°-rotating platform.

UpRight Powered Access G-117

Reflecting the company's decision to use the UpRight brand in North America for its trailer mounts and push-around lifts – its other products are being sold under the Snorkel name – visitors can see Upright's 43 ft working height TL37 and the 55 ft working height TL49K trailers.

Wuxi-Shenxi Construction Machinery C-7269c

This Chinese manufacturer's range includes mast climbing products, and may show some at ConExpo.