ic050527.xml
Premium Content
08 May 2008
| Specification of Kranbau Eberswalde AHC 1000 mobile port crane | |
|---|---|
| Carrying capacity in hook operation (tonnes) | |
| at a radius of 40 m | 20 |
| at a radius of 24 m | 40 |
| at a radius of 18 m | 63 |
| Carrying capacity in grab operation (tonnes) | |
| at a radius of 40 m | 16 |
| at a radius of 32 m | 20 |
| Hoisting height above quay in hook operation (m) | approx. 28 |
| Hoisting height above quay level for grab operation (m) | approx. 24 |
| Lowering depth of spreader below quay level (m) | 12 |
| Maximum rear radius (m) | 7.5 |
| Gantry gauge between rail centres (m) | 10.5 |
| Length, between bumpers, (m) | approx. 20 |
| Maximum wheel load per corner in operation (kN) | 1650 |
| Wheel load on one wheel (kN) | 400 |
| onto a group of rubber-tired wheels depends | on the overall |
| onto a steel wheel | travelling bogie |
| Spec. load onto the quay surface during travelling | 0.9 N/mm |
| Number of travelling bogie units | 8 |
| Wheel base of travelling bogies, length x width (m) | 11.6 x 10.5 |
| Travelling gear drive: | |
| electric (V, Hz) | 400, 50 |
| diesel (kVA) | 800 |
| Mechanism capacity (kW) | 700 |
| Weight (approx.), t | 320 |
| Maximum operating spees: | |
| Hoisting (m/min) | 80 |
| Slewing (min-1) | .5 |
| Luffing (m/min) | 50 |
| Travelling (m/min) | 75 |
When the demands of a jobsite dictate tire selection, field knowledge and data are key to optimising fleet performance
A lower-cost shear can be tempting, but what might contractors discover when they do their due diligence?
The buyer journey is now more complicated than ever before, thanks to the AI world. What should construction marketers do to reach their buyers?