Snorkel issues safety bulletin

By Lindsey Anderson28 August 2017

Snorkel has issued a safety-related technical bulletin for all ATB60 and AB60J articulated boom models manufactured from 1990 to present.

The bulletin requires the inspection of the lower lift cylinder pin for corrosion, cracks or abnormal wear. 

127616 snorkel logo

The bulletin initiates a mandatory inspection, initial replacement of the pin if in excess of eight years in service from the time the lift was manufactured and subsequent replacement of the pin every eight years thereafter.

The date of manufacture can be found on the machine serial placard.

Snorkel recommends all pins be immediately inspected and if required, replaced. Thereafter, the pins will need to be inspected every 90 days or 150 hours, whichever comes first.

The bulletin detailing the inspection procedure, along with the proper procedure to remove and reinstall any pins showing abnormalities can be accessed here.

Machine owners should refer to the service bulletin in the first instance. Any questions relating to this bulletin should be directed to Snorkel product support – local contact details can be found at the end of the bulletin and also at Snorkel’s website.

 

Latest News
What will the cities of the future look like?
The world’s biggest cities will be located in different areas than today and will also look considerably different 
New chief executive for Cimic
Pedro Vicente has been promoted to be the group’s chief executive
Construction of underwater research facility
Drass Group will partner with Proteus Ocean Group on underwater research facility project