Gomaco’s new 5400 Series paving mold

The new 5400 series paving mold is designed with a structural integrity that is unmatched in the industry. Features include a new box design with durable 0.5 inch (13 mm) paving skin Vertically-adjusting mold mount for precise leveling of mold to machine. Telescoping end sections with 12 inches (305 mm) of width variation on each side are available. Standard paving depth is zero to 24 inches (610 mm). Edge slump adjustment. Hydraulic Vertical Hinged Sideplates, self-contained inside the mold for track clearance. Split, pressure-compensated sideplates. Folding sideplate wings for transporting without removing. Pivoting mold mounting beam to eliminate stress points. Self-supported TA is hydraulically driven with 3.5 inch (89 mm) ACME screws for up to a six inch (152 mm) crown. Front and rear top T-bar on mold for attaching accessories and structural integrity. Inserts are bolted together with front and rear alignment pins for easy mold assembly. New vibrator mounting tube attaches to T-bar on mold with vertical vibrator lift and a rear lubrication system with grease zerks accessible from the work bridge. New strike-off that’s mounted on paver frame T-rail, independent of the mold; a new modular design with wedge lock system for ease in changing widths; 10 inches (254 mm) of hydraulic height adjustment; hydraulic crown adjustment. Spreader plow mounted to paver frame T-rail, optional auger available. Tamper bar optional